Flat fan nozzle
Flat fan nozzle Common Application:
Scrubbers
Rinsing
Cooling and quenching
Gas washing
Sand, coal, and gravel washing nozzle
Parts washing
Cooling and quenching
Flat fan nozzle Spray pattern: Fan and Straight Jet
Thread size: 1/8″ – 3″ BSPT or NPT
Spray angles: 0° to 120°
Flow rates: 0.39 to 3430 L/min at 3bar
Standard Materials: 303 Stainless Steel, Brass, 316 Stainless Steel, PP, PVC, PVDF and PTFE
Flat fan nozzle
Flat fan nozzle Common Application:
Scrubbers
Rinsing
Cooling and quenching
Gas washing
Sand, coal, and gravel washing nozzle
Parts washing
Cooling and quenching
Flat fan nozzle Spray pattern: Fan and Straight Jet
Thread size: 1/8″ – 3″ BSPT or NPT
Spray angles: 0° to 120°
Flow rates: 0.39 to 3430 L/min at 3bar
Standard Materials: 303 Stainless Steel, Brass, 316 Stainless Steel, PP, PVC, PVDF and PTFE
Flat fan nozzle
This nozzle is the same nozzle as CCU and CCV, but the difference is with a filter, we have 50mesh, 100mesh, 150mesh for you to choose.
For the specifications, please refer to CCU.
Full Cone Spray Nozzle
Design Features of the full cone Nozzle:
Small capacity full cone nozzles feature a solid, cone-shaped spray pattern with a round impact area, Their uniform spray distribution of medium to large-sized drops results from a unique vane design with large flow passages and superior control characteristics.
High Impact Flat Fan Nozzle
Design Features :
The precise alignment of the nozzle orifice with the deflector surface, and the low deflected angle produce a spray pattern with a narrow spray angle. (Choice of 15 to 50 degrees). Due to the thin line of the pattern, impact is higher than standard flat fan nozzles. A relatively large orifice is resistant to clogging.
One-piece construction
No internal parts
Sizes for all applications
Male and female connections
High impact
Uniform distribution with tapered edges for overlapping sprays
Extra-wide angles available
Common Application:
Scrubbers
Rinsing
Cooling and quenching
Gas washing
Sand, coal, and gravel washing nozzle
Parts washing
Cooling and quenching
Paper making
Spray pattern: Fan
Spray angles: 15°, 25°, 35°, 40°, 50°
Flow rates: 1.6 to 177 L/min at 3bar
Standard Materials: 303 Stainless Steel, Brass, 316 Stainless Steel, PP, PVC, PVDF and PTFE
High pressure nozzle with filter
Products Information:
1.MFD series high pressure anti-drop fine fog nozzles have guide vane inserted and have a anti-drop equipment.
2.Under the pressure of 20-70KG/m2(290PSI-1015PSI), the liquid flows in a high speed forming a centrifugal vortex In the vanes, then spray the fine droplets from the orifice.
3.This kind of nozzle can be used in artificial fog, disinfection, cooling, humidifying etc. As the wide use in artificial fog industry, it’s also called artificial fog nozzle, cooling fog nozzle.
4.Material of Nozzle’s body: stainless steel
Specifications:
Material : brass ,stainless steel, nickle-plated brass
Inlet size: 10/24, 12/24, 3/16, 1/8
Feature:
1. Without air’s supplementary, system device is simple.
2. Fog’s droplets’ diameter ranges from 3-70UM, and spray fully.
3. Energy and water saving, low cost and good effects.
4. Non-blocking and anti-drop.
5. Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.
Application:
Textile workshop humidification
Stock farm cooling sterilize
Man-made fog sight
Vegetable retain freshness
Dust removing
poultry house
High pressure SS misting nozzle
Products Information:
1.MFD series high pressure anti-drop fine fog nozzles have guide vane inserted and have a anti-drop equipment.
2.Under the pressure of 20-70KG/m2(290PSI-1015PSI), the liquid flows in a high speed forming a centrifugal vortex In the vanes, then spray the fine droplets from the orifice.
3.This kind of nozzle can be used in artificial fog, disinfection, cooling, humidifying etc. As the wide use in artificial fog industry, it’s also called artificial fog nozzle, cooling fog nozzle.
4.Material of Nozzle’s body: stainless steel
Specifications:
Material : brass ,stainless steel, nickle-plated brass
Inlet size: 10/24, 12/24, 3/16, 1/8
Feature:
1. Without air’s supplementary, system device is simple.
2. Fog’s droplets’ diameter ranges from 3-70UM, and spray fully.
3. Energy and water saving, low cost and good effects.
4. Non-blocking and anti-drop.
5. Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.
Application:
Textile workshop humidification
Stock farm cooling sterilize
Man-made fog sight
Vegetable retain freshness
Dust removing
poultry house
Hollow cone nozzle
This nozzle produce a circular spray where the liquid is distributed around the perimeter or circumference of the circle .
It is mainly useful for Air and Gas washing ,Aerating ,Rinsing and Humidifying .
Industrial ashers and Spray Ponds ,Cooling Tunnels ,Roof Cooling ,Degreasing,Dust Suppression,Metal Treatment.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.
INDUSTRIAL SPRAY NOZZLE MADE IN CHINA
Our main products are spray nozzles, full cone nozzles, flat fan nozzles, air atomized nozzle, windjet nozzles ,misting nozzle and outdoor cooling system, spiral nozzles and etc.